Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

30 total results found

Hardware Overview

SYGNALcam Unit Overview

Hardware Capabilities Total Video Inputs: 2 (1 HDMI, 1 SDI)  HDMI at 4kp60, SDI at 1080p60Total Video Outputs: 3 (2 HDMI, 1 SDI) HDMI at 4kp60, SDI at 1080p60Audio Outputs: 2 (via 1x TRS 3.5mm Jack)Ethernet: 2x 2.5G Ethernet portsWifi: Intel AX210 (wifi 6E) ...

First Time Network Connection

SYGNALcam Getting Started

Connecting to your sygnalTRX unit for the first time. First, you must connect to your unit via a network connection. There are multiple ways to connect to your sygnalTRX unit to a network. Below is a list of these methods, which are explored in more detail be...

Accessing the sygnalTRX Web GUI

SYGNALcam Getting Started

Once your sygnalTRX unit is connected to the network, the GUI can be accessed simply by going to the IP address of the device in a web browser. This is displayed on the OLED display on the side of the device. If your device has multiple IP addresses, for examp...

Adding a sygnalTRX unit to the device list in sygnalCONTROL.

SYGNALcam Getting Started

If you wish to administer your device via sygnalCONTROL, rather than directly via the web GUI, first open sygnalCONTROL. This can be achieved by visiting the IP address of a sygnalCORE or sygnalGLUE server, or by downloading and installing the standalone sygna...

Network

SYGNALcam The sygnalTRX web GUI

The network configuration tab The network configuration tab is split into two halves:Wifi, and everything else. On the left To connect to a discovered SSID, click the connect button and then fill out the authentication details. If successful, the sygnalTRX ...

Encoders

SYGNALcam The sygnalTRX web GUI

The encoders tab is where you go to take an input, encode it and stream it somewhere. The sygnalTRX 2x3 has 8 on board hardware encoders (at 1080p60). 4 of these hardware encoders available to the user. Each of these encoders also generates a low resolution s...

Outputs

SYGNALcam The sygnalTRX web GUI

There are 5 routable destinations in the "Outputs" tab. First there are the 3 hardware outputs: HDMI 1, HDMI 2 and SDI. Next is the input to the record/playback module, and lastly there is the "return" input to the Prompt module. By default, bars is routed to...

Prompt

SYGNALcam The sygnalTRX web GUI

The sygnalPROMPTER is a licensable add-on available for all sygnal units. The prompter output is generated on device which means that there is no encoding/decoding latency, allowing for super low latency prompting and smooth scrolling.  Licensing the prompte...

Playback

SYGNALcam The sygnalTRX web GUI

The playback module is a simple clip recorder and playback system, with network management features. It can be controlled via the sygnalTRX device's GUI, or the sygnalCONTROL application. 

System

SYGNALcam The sygnalTRX web GUI

The system tab is home to information about the unit, and general configuration items that were not relevant to the other tabs. System Information In the system information block, you will find hardware status information such as temperature, CPU usage and d...

Advanced Video Coding - H.264

Glossary of Terms

Description Advanced Video Coding (AVC), also called H. 264, is the most common video compression standard in use today. AVC/H. 264 can encode high-quality video at lower bit rates than older compression standards (the "bit rate" is the number of units of i...

Websocket Connections

API API v1.0

The Sygnal API is websocket based. You can establish a connection to a sygnal device via the configured IP and port of the webGUI. By the nature of being a websocket API there us no direct request-response model. However, in most cases when sending a request ...

Hardware Overview

SYGNALmini Unit Overview

First Time Network Connection

SYGNALmini Getting Started

Accessing the sygnalRX mini Web GUI

SYGNALmini Getting Started

Adding a sygnalRX mini to the device list in sygnalCONTROL

SYGNALmini Getting Started

Network

SYGNALmini The sygnalTRX web GUI

The network configuration tab The network configuration tab is split into two halves:Wifi, and everything else. On the left To connect to a discovered SSID, click the connect button and then fill out the authentication details. If successful, the sygnalRX m...

Encoders

SYGNALmini The sygnalTRX web GUI

The encoders tab is where you go to take an source, encode it and stream it somewhere. The sygnalRX mini has 1 on board hardware encoder. The encoders tab is split into three columns: Source, Encoder, Stream. If you have not yet created an encoder, click on ...

Outputs

SYGNALmini The sygnalTRX web GUI

Outputs There are 2 routable destinations in the "Outputs" tab. First there is the hardware output: HDMI 1. Next is the "return" input to the Prompt module. By default, bars is routed to all outputs. This enables you to find out information about your sygn...

Prompt

SYGNALmini The sygnalTRX web GUI

Prompt The sygnalPROMPTER is a licensable add-on available for all sygnal units. The prompter output is generated on device which means that there is no encoding/decoding latency, allowing for super low latency prompting and smooth scrolling.  Licensing t...